Padlock to Pet Training Aids wholesale china

Padlock to pet training aids
It has two kinds of signal mode, and the launch area radius is about 3 metres. The first mode is shock after vibration, the second mode is only vibration ( the shock is closed)
The first mode is used in training, at that time, the master should train the pet patiently.
When the pet strays into an area that's off-limits, it will make a warning sound "BB" until the pet leaves the area, and the receiver in the collar will give a vibration warning signal to remind the pet of leaving quickly. If the pet rejects to leave, the two metal probes in the receiver will make static shock and vibration which will make the pet too uncomfortable to leave. If only the pet leaves the off-limits area in time, the static shock won't work.
The second mode should be used after successfully training the pet. This kind of mode has closed the shock function. If the pet strays into the area that's off-limits, it will only receive vibration warning.
After being trained several times, the pet will learn to stay out of the off-limits area. Even without the product in the future, it won't approach to the area again.
A: The using method
1. Open the rear cover, put the two batteries into the battery holder ( please pay attention to the direction of the battery), then cover the battery cover again.
2. Press the power switch on the driving machine surface until the red indicator light lights. If you want to cut down the power, you need to press the power switch over 5 seconds until the indicator light doesn't light.
3. When the power is opened and the driving machine is in the first mode(red indicator lights t), if you press the power switch one time, it will turn to the second mode ( green indicator lights ), if you press the switch again, the driving machine will turn to the first mode again.
4. Please put the implement into the area you want to protect, it can be hung on the wall or be kept flat. The effect will be better if the pet can see it easily.
5. In the area which takes the driving machine as the centre with the radii of 3 metres, it can feel the receicer, but the radio signal may be influenced by the things that can influence the radio waves (such as the metal objects and the electrical appliance), then the distance will be changed. In order to make sure the protected area, you should take the receiver in your hand and approach to the driving machine slowly outside 3 metres circle after openning the driving machine, then you can ensure whether the line of the proteced area is suitable.
If you don't use the driving machine for a long time, please cut the power.
You can use several driving machines at one time, which can enlarge the protected area.
B: The receiver
1. Open the battery cover, put the two batteries (type: AAA/1.5V) into the battery holder ( please pay attention to the direction of the battery), cover the battery cover again...
2. On the side of the receiver, you can see the indicator light flash, it shows that the power has been connected. If the indicator light doesn't light, please check that whether the batteries are installed correctly or the electricity is too low. Please replace the batteries if necessary...
3. You can use the testing bulb to test the shock function if the driving machine is in the first mode.
4. When the driving machine is in the second mode, the shock function will be closed.
5. If you don't use the receiver for the present, please take out the batteries.
6. You can use several receivers at the same time, they won't influence each other.
C: Attention
1. The driving machine is a machine which can make radio signal, it uses the 2.4GHZ global advanced frequency band which is free.
2. The pet may feel uncomfortable when it wear the receiver at the first time, you had better let the pet adapt to the receiver collar first, if you make sure that the pet has adapted to the collar, open the driving machine.