Solar LED Tiles wholesale China

Navigation: Home> Electronics Department > Solar Products > Solar LED Tiles

Solar Floor Tile

Item No:So9046279

Material: polycarbonate of high light transmittance Solar panel: 1.2W Battery: Ni-Mh 2 x AA 1,200mAh batteriesLight source: super bright LED, red, green, blue, white, yellow Type of lumination: constant lumination Operating time: 20 hours continusly with fully charged battery Protection class: IP68 Compression resistance: 57993422890T Ambient temperature: 40 to 7549840C

Solar Floor Tile

 

Solar LED Pavers Tiles

Item No:So9046259

Dimensions and weightSize: 99 x 99 x 60mmWeight: 650gPhysical propertiesCompressive strength: 69,872 NWater-resistant: IP68Operating temperature: -40 to +70 degrees CelsiusOperating time: more than 20 hoursOnset point: 150 to 350luxCharging time: 3 (sunny) to 8 (cloudy and rainy) Color: amberLuminance (Nit): 2.4/2.0Illuminance (Lux): 7.5/6.3Uniformity: 83%Luminance(cd/m) measurement: The luminance of 9 points on the lighting area are measured and averaged.Illuminance(lm/m) is obtained by multiplying 3.14 to luminance.Uniformity is obtained by dividing minimum luminance by maximum luminance from 9 point measurements.Basic components:Single crystalline solar cellSolar maximum output power: 1.788WSolar operating current: 600mASolar voltage: 2.98VLEDLED size: 3.5 x 2.8mm chip typeLED current: 20mA per eachLED operating current: R,Y,O (1.8mA per each) B,W,G (1.1mA per each)LED voltage: R,Y,O(2.5V) B,W,G(4.0V)LED wattage: 0.004WLED quantities: 4 piecesPseudo capacitor:Pseudo capacitor: 2.3V 120FNumber of Pseudo capacitor: 2 pcs

Solar LED Pavers Tiles

 

Solar LED Tile

Item No:So9046257

Dimensions and weight:Size: 198 x 198 x 60mmWeight: 2.8kgPhysical properties:Modulus of rupture: 222kgf/cm2Compressive strength: 28kgf/cm2Breaking load: 2,555kgfWater-resistant standard: IP68Operating temperature: -40 to +70 degrees CelsiusOperating time: more than 12 hoursOnset point: 150 to 350LuxCharging time: 3 (sunny), 8hrs (cloudy and rainy) Color: greenLuminance 1: 8.8/7.8NitIlluminance 2: 27.6/24.5LuxUniformity: 89%Luminance (cd/m) measurement: luminance of 9 points on the lighting areas are measured and averagedIlluminance (lm/m) is obtained by multiplying 3.14 to luminanceUniformity is obtained by dividing minimum luminance by maximum luminance from 9 point measurementsBasic components:Single crystalline solar cellSolar maximum output power: 2.34WSolar operating current: 7.85mASolar voltage: 2.98VLED:LED size: 3.5 x 2.8mm chip type, (3.2V/20mA)LED current: 20mA per eachLED operating current: 2.0mA per eachLED voltage: R, Y, O (2.5V), B, W, G (4.0V)LED wattage: R, Y, O (0.02W), B, W, G (0.032W)LED quantities: 4 piecesPseudo-capacitor:Pseudo-capacitor: 2.3V, 120FNumber of pseudo-capacitor: R, G, B, Y, O (5EA), W (6EA)

Solar LED Tile

 

Solar LED Tiles

Item No:So9046245

Dimensions and weight:Size: 99 x 198 x 60mmWeight: 1.0kgPhysical properties:Modulus of rupture: 95kgf/cm2Compressive strength: 9.1kgf/cm2Breaking load: 1,518kgfWater-resistant standard: IP68Operating temperature: -40 to +70 degrees CelsiusOperating time: more than 12 hoursOnset point: 150 to 350LuxCharging time: 3 (sunny), 8hrs (cloudy and rainy) Color: blueLuminance 1: 16.6/11.6NitIlluminance 2: 52.1/36.4LuxUniformity: 70%Luminance(cd/m) measurement: luminance of 9 points on the lighting areas are measured and averagedIlluminance(lm/m) is obtained by multiplying 3.14 to luminanceUniformity is obtained by dividing minimum luminance by maximum luminance from 9 point measurementsBasic components:Single crystalline solar cellSolar maximum output power: 1.17WSolar operating current: 393mASolar voltage: 2.98VLED:LED size: 3.5 x 2.8mm chip typeLED current: 20mA per eachLED operating current: 1.8mA per eachLED voltages: R, Y, O (2.5V), B, W, G (4.0V)LED wattage: R, Y, O (0.018W), B, W, G (0.028W)LED quantities: 4 piecesPseudo-capacitor:Pseudo-capacitor: 2.3V, 120FNumber of pseudo-capacitor: (RYO) 3EA, (BWG) 4EA

Solar LED Tiles

 

Solar LED Tiles

Item No:So9046260

Dimensions and weight:Size: 198 x 198 x 60mmWeight: 2.8kgPhysical properties:Modulus of rupture: 222kgf/cm2Compressive strength: 28kgf/cm2Breaking load: 2,555kgfWater-resistant standard: IP68Operating temperature: -40 to +70 degrees CelsiusOperating time: more than 12 hoursOnset point: 150 to 350LuxCharging time: 3 (sunny), 8hrs (cloudy and rainy) Color: blueLuminance 1: 16.8/13.3NitIlluminance 2: 52.8/41.8LuxUniformity: 79%Luminance (cd/m) measurement: luminance of 9 points on the lighting areas are measured and averagedIlluminance(lm/m) is obtained by multiplying 3.14 to luminanceUniformity is obtained by dividing minimum luminance by maximum luminance from 9 point measurementsBasic components:Single crystalline solar cellSolar maximum output power: 2.34WSolar operating current: 7.85mASolar voltage: 2.98VLED:LED size: 3.5 x 2.8mm chip type, (3.2V/20mA)LED current: 20mA per eachLED operating current: 2.0mA per eachLED voltage: R, Y, O (2.5V), B, W, G (4.0V)LED wattage: R, Y, O (0.02W), B, W, G (0.032W)LED quantities: 4 piecesPseudo-capacitor:Pseudo-capacitor: 2.3V, 120FNumber of pseudo-capacitor: R, G, B, Y, O (5 EA), W (6 EA)

Solar LED Tiles

 

<< 1  >>