Navigation: Home> Home & Garden Department > Industrial Supplies > Mini Circuit Breaker
Item No:In9049362
Used in AC and DC 32A and below electric circuits of 50hzVoltage: upto 380 and 250VUsed for protection of electrical circuits and apparatus in office and residence buildings
Item No:In9049360
Number of poles: 1P, 2P, 3P, 4P and 3P + NRated current (In): 6, 10, 16, 20, 25, 32, 40, 50 and 63ATripping curve: B, C and DReliable and economicalProtect cables and equipment against overload and short-circuitStandard: IEC60898Widely used in MCBAll brands and trademarks used are for reference only
Item No:In9049354
Applied to protect over-current of electrical apparatus and circuit device of construction and similar building in the circuit with rated frequency of AC 50Hz, rated voltage of 230V/400V and maximum rated current of 63ACan also be applied as the infrequent make-break operationPole number is from 1 pole up to 4 polesRated limit short circuit breaking capacity is 10kA and mechanical lifetime is 20,000 timesConforms to standards of IEC60898: 1995 and GB10963-1999 (requirements of over-current protection circuit breaker for household or other uses)
Upgraded Mini Circuit Breaker with Breaking Capacity
Item No:In9049348
3SB1-63N is an upgraded MCB based on 3SB1-63Adopts to the bus bar installationModified profile is much more appealing to customer'sNumber of poles: 1, 2, 3 and 4PRated current (In): 1, 3, 6, 10, 16, 20, 25, 32, 40, 50 and 63ARated operating voltage: 230 or 400V ACRated short circuit breaking capacity: 6kA (1 to 40A) and 4.5kA (50 to 63A)Tripping curve: B, C and DStandard: IEC60898-1 VDE 0641Certifications: CE, CB, SEMKO and VDE
Item No:In9049346
Features:Short-circuit protectionOverload protectionControl and isolation wiringTerminals wiring areasCurrent limit grade: treeQuick closingMechanical lifespan: 20,000 timesManual control: two reset modes are allowed for handleCreepage device reset simultaneouslySpecifications:Rated current: 163ARated voltage: 230 or 400 V ACFrequency: 50HzInstantaneous trip: 10 to 14InRated creepage action current: 30mAIn=40A creepage accessories can connect 16mm2 multi-strand soft wires or 25mm2 single-strand hard wiresIn=63A creepage accessories can connect 25mm2 multi-strand soft wires or 35mm2 single-strand hard wiresConform to IEC898/GB10963-1999 and CCCSafety certification
Item No:In9049344
Thermal magnetic MCBS up to 63ABreaking capacity6000A-EN 6089810KA-IEC 60947-2Single-pole: 230/400VDouble-pole: 400VThree-pole: 400VFour-pole: 400V
Item No:In9049342
Pole: 1 pole 2 pole 3 pole 4 pole Rated voltage UN: 230/400V AC, max, 60V DC Rated current IN: 0.5-63A Rated frequency FN: 50Hz Rated breaking capacity: 3KA, 4.5KA, 6KA Energy limiting class: 3 Tripping characteristic: B, C, D Cross-section of connecting lead: 1-25mm2 Isolating class: B Mounting on the rail: EN50022 Build-in width: 18mm/pole Sealing possibility: ON-OFF Standards: IEC 60898, EN60898
Item No:In9049340
Compatible with standard busbar Contact position indicating window Twin-purpose terminal(lift/open-mouthed)above and below Busbar positioning optionally above or below Meets the requirements of insulation co-ordination For overload & short circuit protection which used in household and industrial distribution systemElectrical Design according to RYM02 IEC/EN 60898 Current test marks as printed onto the device Rated voltage RYM02 AC: 230/400V Rated frequency 50/60 Hz Characteristic C, D Selectivity class 3 Endurance =8, 000 operating cycles Line voltage connection optional (above/below)Mechanical Frame size: 57mm Device height: 71mm Device width: 25mmper pole(1MU) Mounting: Plug-in Type Degree of protection: IP20 Upper and lower terminals: Open mouthed/lift screw terminals Terminal protection: Finger and hand touch safe, Terminal capacity: 1-25 mm2 Terminal fastening torque: 2-2.4 Nm
Residual Current Circuit Breaker
Item No:In9049330
Products' brief: -Shape compatible with and suitable for standard busbar connection to Other devices of same series -Twin-purpose terminal (lift/open-mouthed) above and below -Busbar positioning optionally above or below -Free terminal space despite installed busbar -Contact position indicator red-green -The device functions irrespective of the position of installation -Tripping is line voltage-independent. Consequently, the -RCCB is suitable for "fault current/residual current protection" -Type-A: Protects against special forms of residual pulsating DC which have not been smoothed -Rated current:16/25/32/40/63/80/100ADesign according to IEC/EN 61008 Current test marks as printed onto the device Tripping instantaneous Rated voltage Un 240/415V, 50/60 Hz Rated tripping current I52884n 10,30,100,300,500 mA Sensitivity AC and pulsating DC Rated insulation voltage Ui 440 V Rated impulse withstand voltage Uimp 4 kV Rated short circuit strength Inc 6 kA Maximum back-up fuse Short circuit In =16-63A 63A gG/gL In =80A 80A gG/gL In =100A 100A gG/gL Rated breaking capacity Im or Rated fault breaking capacity I52884m In =16-40A 500 A In =63A 630 A In =80A 800 A In =100A 1,000 AVoltage range of test button 2-pole 184-250 V~ 4-pole 184-440 V~ Endurance Electro-mechanical comp. 5799342292,000 operating cycles Mechanical Frame size 45 mm Device height 86.4 mm Device width 36 mm (2MU), 72 mm (4MU) Mounting quick fastening with 2 lock-in positions on DIN rail IEC/EN 60715 Degree of protection, built-in IP20 Degree of protection, in moisture-proof encl. IP54 Upper and lower terminals open mouthed/lift terminals Terminal protection finger and hand touch safe, Terminal capacity 1.5- 35 mm2 single wire 2 x 16 mm2 multi wire Busbar thickness 0.8- 2 mm Tripping temperature -5oC to +40oC Resistance to climatic conditions according to IEC/EN 61008
Item No:In9049361
The product is neoteric in structure, light in weight, reliable and excellent in performance comply with IEC 60898 and GB10963It has high breaking capacity, can trip quickly, and its case and items are adopted by high fire-resistant and shock-resistant plasticsProduct is mainly used in AC 50Hz/60Hz single-pole 230V or two, three, four pole 400V circuit for overload and short-circuit protectionFor unfrequent on-and-off switching electric equipment and lighting circuit in normal casePacking: can be packed as clients' requirements
<< 1 2 >>
