Solar Burglar Alarm and Intelligent Security Alarm wholesale china

DIY, esy-to-install and operation. Cost-effective. Multi-functional and useful for home and commerce! Solar panel plus to make easy to use in place under sunshine.
Featurs:
1. Protection different zone: 32 zones with 32 different zones indicated on panel.
2. Each zone can be put more sensors.
3. Partial disarmed optional by remote control. One keypad easy to partial disarmed
Some sensors that programed in the second zone.
4. Auto-dial up 6 phone numbers and recycle to repeat unless confirmed.
5. Store voice recorded message (10 second), it can be recovered. When received alarm
Message, it speaks as you spoken.
6. Ni-MH rechargeable battery to back up power: >24 hours. Auto-switch if AC power is off.
7. Telephone manages the alarm system, convenience.
8. Phone trunks protected to avoid any designing destroy.
9. LED on the panel to display protection zone.
10. PIR detector is preset for the second zone which can be disarmed solely
11. Audible / mute siren optional.
12. Quick program by the panel keyboard.
13. When received alarm call, you can press the keypad on the phone to disarm / arm / monitoring / start on / off siren
14. Panel keyboard password protected and incoming calling password protected.
15. Alarm time can be customized.
16. Siren sounds time / alarm triggered time / armed alarm times to be programmed to be delayed
17. All panels can connect with the alarm receipt managing centre
18. Easy to learn the new remote control to change the code and work with new sensors
19. Solar panel: 1200mA/9v Batterty to support 7days as standby. More capacity is optional to select.
Specification:
1. Wireless frequency: Two option: 433MHz or 315MHz
2. An adaptor: Option: Input electricity from 110 acv ~240 AC, customized.
Adaptor choosing: Two round pins, two flat pins, three pins customized
3. Wireless receiving distance in open place: >200m, indoor: 30~50m, (depend on the surrounding environment and wireless interference)
4. Standby current: < 10ma
5. Alarm volume: Internal: 95dB, external siren: 110~120 dB
6. One control panel with one internal siren: Working voltage: 9 dcv, 500ma. Panel Size: 30x22x70cm
7. Two wireless remote controllers: Four button: Disarm / arm / panic / PIR detector
8. One wireless magnetic door sensor: 12 dcv
9. One wireless infrared detector: 10m*120degree horizontal 60degree vertical
10. Optional sensor: Wire siren, wireless smoke detector, gas leakage detector, vibration Sensor, outdoor external siren with strobe, remote control, all sensors as we selling
11. Packing box: 31.5*25.8*7.5cm; Carton (10sets): 65*28*40cm. Standard package: One control panel, one magnetic door sensor, One PIR detector, two remote controllers, one telephone line, one adaptor, one instruction.
CCTY Survelliance system is optional. DIY! Upgraded, This CCTV system is learning code. Easy-to work with wireless detectors diretly, uses two cameras, two channels auto-take per 16 PCS photos per channel when alarm is triggered. (total is 32 PCS photoes, 64 PCS optional) output audio&video. CCTV two channels Real-time watch through Monitor.