Automatic Aerosol Dispenser with Smart Chip
1st switch:
Move this switch can adjust dispenser spray interval time, it has 3 interval spray time: 10/20/40 minutes
2nd switch:
(caution: please ensure the spray nozzle away from your face and eyes); when you move the switch from off to on, the dispenser will spray 1 time after 4 seconds delay
Power on and enter 24 hours working function
Day: the dispenser will enter day spraying function
Sensor: light sensor
LED: red and green dual color
When you move the switch from off to on, the LED will flash red and green for several times, then enter into normal working condition, the LED will flash green color
Specification:
Material: ABS, POM
Unit weight: 370g
Dimension: 22.5 x 12.5 x 8.5cm
Batteries: 2 x AA batteries
Spray interval: 10, 20, 40 minutes
Controller: micro-controller
Installation:
It is recommended that the dispenser be installed high on the wall (above 2.0m) to avoid the sprayed aerosol coming into contact with passers-by and to reduce the risk of vandalism
Open the front cover from right to left
Hold the back plate to the wall and mark the hole positions, then drill for the screws and plugs provided and fit the dispenser to the wall
Package includes:
Dispenser: 1 unit
Fix screws: 2 units
Expanding plug: 2 units