Navigation: Home> Home & Garden Department > Hardware Tools > Electric Wrench
Item No:Ha9014004
Features - Voltage: 120 Vlt - Frequency: 60 Hz - Double Insulated - Max Torque: 235 Ft/lb - Rated Current: 7 Amp - Motor Power: 700 Watts - No Load Speed: 2100 rpm / 2700 BPM - Hits Bolt With: 240 Ft/Lbs Of Force - Forward / Reverse Switch - Socket Size: 11/16", 3/4", 13/16", 7/8"
Item No:Ha9013991
Features:a) Voltage: DC124Vb) Output torsion: 1,300N. m.c) Output square shaft: 3 / 4d) Load current: <15Ae) Length of cord: 10mf) Outer cover: high - intensity plasticg) Outer casing: blowing boxh) Size: 605 x 260 x 134mmi) Weight: 10kgj) Packing: 2pcs / cartonk) Carton size: 605 x 260 x 134mml) N. W.: 20kgm) G. W.: 21kg
Item No:Ha9013990
PRODUCT'S BASIC TECHNICAL DATAModel number: JW-H340Rated voltage: DC12VMax. torque:350N.MMax electric current: 12ARated power:85WNet Weight: 1.4kgDin of box :28*23*11.5cm
12 Volt DC Electric Auto Impact Wrench
Item No:Ha9013975
Takes the hard work out of removing and tightening the wheel nuts on your car Powered from the cigarette lighter socket or direct from the battery using the leads supplied 340Nm Torque Nett weight 2Kg Supplied in handy carry case Supplied with hub removal tool, spare fuses ,car battery connectors and instruction manual Complete with sockets 11/16 inch (17.5mm) ? inch (19.1mm) 13/16 inch (20.6 mm) and 7/8 inch (22.2mm)
Item No:Ha9013999
Operation: 1)Turn on the power of the car. If the voltage of the battery is too low, please start the engine. 2)plug into cigarette lighter or connect with the car's battery. 3)Choose the proper socket to the wrench's shaft. 4)According to working rotation, choose the switch for loosening or tightening (Do the reverse for L. H. Screw) A. Press left side of the switch (with mark II)to start opreation, and each nut will be loosen after two or three times of "clatter" sound. B. Press right side of switch (with mark I) to tighten nuts, it will be tight enough after two or three times of "clatter"sound.
<< 1 >>
